Techniques to Fix Wavlink Extender Yellow Light Issue
If you performed Wavlink WiFi extender setup and noticed a yellow light glowing instead of the usual green light, don’t worry! This is a common issue faced by many users around the globe, and there are some simple reasons behind it. In this blog, we’ll explain the possible reasons behind the Wavlink extender yellow light issue and also provide you with easy-to-follow solutions. Keep reading!
Reasons for Wavlink Extender Yellow Light Issue
First, we would like to tell you about the reasons because identifying them will easily help you to fix the issue in no time.
Poor Signal Strength
The most common reason for the yellow light problem is a weak signal between your Wavlink extender and the router. If the extender cannot receive a strong signal from the main router, it will display a yellow light indicating the connection is not optimal.
Distance from the Router
The excessive distance between the extender and router also could be the reason. If the distance is too much, the extender may struggle to maintain a stable connection, thus showing the yellow light.
Interference from Other Devices
Electronic devices like cordless phones, microwave ovens, or Bluetooth devices can cause interference with the Wi-Fi signal, leading to the Wavlink extender yellow light problem.
Outdated Firmware
Sometimes, outdated firmware on your Wavlink extender can also lead to connectivity issues and the appearance of the yellow light.
Improper Electricity
It is important to give the proper electricity to the extender because, without a sufficient power supply, extender faces difficulties in working.
Thus, these are the common reasons that caused the Wavlink extender yellow light issue. To fix this, you just need straightforward guidance that is explained in the further section.
Fix: Wavlink Extender Yellow Light Issue
Placement of the Extender
The first step is to ensure that the extender is placed in an optimal location. Try to position it closer to the main router, preferably within the router’s Wi-Fi range. This will help improve the signal strength.
Check for Interference
Identify any electronic devices that might be causing interference with the Wi-Fi signal. Keep your Wavlink extender away from such devices to ensure a clearer signal transmission.
Update Firmware
Access the Wavlink extender web address to check firmware updates for your extender model. If there is an update available, download and install it following the instructions provided by Wavlink on its official website. Upgrading the firmware can also improve the overall performance of the extender.
Reboot the Extender
Now, you should reboot the Wavlink extender because sometimes power cycle processes fix the minor bugs in the device. Plus, it also removes technical glitches. Below we mentioned the instructions to restart the device:
- Turn off the device by pressing the power button.
- Remove the power cable from the socket.
- Wait for a couple of seconds.
- Plug the extender back into the working wall outlet.
- Turn on the device by pressing the power button.
Now your device has been successfully rebooted.
Hence, these are the solutions that are generally easy to implement, but if you still face the Wavlink extender yellow light problem despite trying them, it’s best to reset the device.
Reset the Extender
Sometimes, a simple reset can do wonders. Here are the steps that you need to follow to reset the extender:
- Ensure that the device is powered on.
- Look for the reset button on the device.
- Press and hold the reset button on your Wavlink extender.
- Hold it for at least 10 seconds until the lights turn off and then turn it on again.
This will reset the extender to its default settings, and it might resolve the yellow light issue.
Conclusion,
Now you know the reasons and solutions behind the yellow light issue. You can tackle the Wavlink extender yellow light issue by implementing the aforementioned hacks. Once the issue is resolved you will enjoy a stable and reliable Wi-Fi connection throughout your home. Happy browsing!